DST Korea






STAX electrostatic earspeakers are widely used throughout the world by discerning audiophiles, professional musicians, and recording companies to enjoy and monitor sound. This is because of the superb sonic quality of STAX electrostatic earspeakers. In general, better sound quality is available with earspeakers than with loudspeaker systems due to several factors.

For instance:

1. Earspeakers are not affected by the acoustic characteristics of the listening room.

Thus sonic coloration can not be injected into the music from standing waves or unwanted sound reflections.

2. Since there is little air loading in earspeakers, the transducing diaphragm can be made light to improve transient response.

3. In contrast to ordinary loudspeaker systems, there is never acoustic feedback through a turntable when using earspeakers.

4. Earspeakers place the transducing diaphragm next to the ear so every detail of the music can be heard.

This is extremely important when using the earspeakers as an evaluative tool in setting up a recording or aligning a cartridge into a tonearm.

To these conventional features. STAX has added the following to their Earspeaker technology:

1. All STAX earspeakers are operated electrostatically.

An electrostatic transducer is a push/pull device that can transduce twice the information in a given time span than a dynamic type transducer.

2. The electrostatic element employs a high polymer film of several microns thick as the diaphragm for far less mass than paper or mylar cones or metal type diaphragms.

3. Since electrostatic elements use no magnets, they are free from magnetic hysteresis distortion that is prominent in dynamic type headphones.

Please audition STAX electrostatic earspeakers. We are confident that they represent the ultimate in musical clarity and sonic transparency.


If we speak of a headphone, it usually means a dynamic one employing a dynamic transducer. In the dynamic transducer the driving force is applied only to the one part of the diaphragm which, therefore, must be stiff enough not to be deformed by air load. However, stiff materials considerably increase the diaphragm mass resulting in significant deterioration of transient response. In addition, the ununiform force applied over the diaphragm area leads to what is called "cone break-up". Hysteresis distortion caused through the magnet inevitable in the dynamic transducer cannot be ignored, either.


The electrostatic transducer adopted in the STAX earspeakers consists of two parallel-arranged fixed electrodes and several microns thick (less than 2 microns) high-polymer film diaphragm suspended in the middle of the electrodes. The low-mass film diaphragm is supplied with the biasing voltage from the energizing adaptors or from the driver unit.

When the fluctuating voltage of the audio signal is applied to the electrodes, the diaphragm is pulled by the electrode which has the opposite charge of the diaphragm's and simultaneously pushed by the other electrode which then has the like charge of the diaphragm's.

The continuous flow of alternating voltage in interpretation of audio signals causes the diaphragm to vibrate in faithful compliance with the amplifier output without time lag, assuring undistorted sound waves. This is why the STAX electrostatic earspeakers sound so good.

The figure above shows the driving mechanism of the Stax earspeakers.